Panasport center cap Tiger's head project

[Beamin Dave]

Hello all,



After completion of the LAT 9 center cap project. I have enough interest in doing a Panasport insert of the LAT 9 Tigers head. It will be CNC machined out of aluminum and should be about 3/16" thick and 2" in diameter. I plan to remove the plastic Panasport emblem and glue/epoxy the insert to the cap. The cost will be $23 ea and shipping should be $7.50 for 1 or 20. Contact me off list if you want to order some. I will need a minimum of 30 to have the machinist make the run.

I have not had any complaints on the LAT 9 caps workmanship so the quality is not an issue. The picture is of the LAT 9 cap but the Tigers head will be near the same size in proportion.

Dave Green

alpdavegre@msn.com

 

[Beamin Dave]

Panasport insert project is done. I have 1 set of 5 of the 2 1/4" and 2 sets of 5 of the 2" inserts for sale at $130 per set. A couple of pictures of the inserts are here. Contact me if interested.
Dave Green
alpdavegre@msn.com

 

[zuluking]

center cap for Libre wheels 2 1/4"

Dave

Do you have a set that can be mounted from outside? center diameter is 2 1/4". need a set that tap into rims from outside.

Or can you sell me one so i can use it as a template for a local shop.

let me know.

cheers

Frank