I have a stainless rear brake hose from the main pipe to the Y section at the rear to go to each brake. Had a small leak and my mechanic (son) found the problem. When bought the new hose has a long thread to mount to the main pipe via a lock nut. The other end is smaller to attach to the Y unit to split the brake to both wheels. The smaller thread is about 5-6mm it needs about 4mm extra to seal.
When I contacted the seller they refuse to tell me the thread length of the smaller end and say it should be fitted with a copper washer that may be a fix however I would like a metal to metal seal
Any answers would be good
When I contacted the seller they refuse to tell me the thread length of the smaller end and say it should be fitted with a copper washer that may be a fix however I would like a metal to metal seal
Any answers would be good