I have a 1966 Tiger that came with the Bullet Mirrors and I've been trying to figure out how you get the mirrors adjusted to be of some use when driving the car? As it is now you can't get them to the correct angle to be able see anything behind you or next to you. Any suggestions? Thanks
Bullet Mirrors
- Thread starter NV TGR
- Start date
Is there a large slotted chrome piece at the leading edge of your mirrors. If so, using a large screwdriver, carefully loosen it and then you should be able to adjust the mirror portion. Be sure to tighten it when you have the mirror right where you want it.
- Messages
- 4,325
The Bulley mirrors when mounted on the doors are not great as they sit very close to the body... So unless you sit low down the line of sight is not good.
Mirrors with extended posts/mounts that hold them off the body work better... Or mounting them on the front guards...
Depending on the type of bullet mirror and mount..some can be slid further forward on the base and that will help the angle ..otherwise adjust the head angle as best you can.. as David describes...the loosening nut is normally at the end of the mirror tip
Mirrors with extended posts/mounts that hold them off the body work better... Or mounting them on the front guards...
Depending on the type of bullet mirror and mount..some can be slid further forward on the base and that will help the angle ..otherwise adjust the head angle as best you can.. as David describes...the loosening nut is normally at the end of the mirror tip