You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
LAT 27 Headers
- Thread starter IronV8
- Start date
grantstigers
Bronze forum user
- Messages
- 24
I don't have any more Tri Y headers left but I do have the down drafts that I reproduced.
Sent you a pm about a not so perfect set of Tri Y's that I have.
Thanks, Grant
Sent you a pm about a not so perfect set of Tri Y's that I have.
Thanks, Grant
Tiger parts
Bronze forum user
- Messages
- 14
There is a complete set of LAT 27 Tri-Ys on ebay at the moment.
Really!
So I admit I wasn't looking at the site for a couple days and now I don't see a listing. Did I miss something? Well if someone has a set they don't need I'm thinking of a retro exhaust setup. Currently have original manifolds for 5 bolt 289 being rebuilt (w/302 crank - keeping things low key) - hence the interest. Thanks for watching.
So I admit I wasn't looking at the site for a couple days and now I don't see a listing. Did I miss something? Well if someone has a set they don't need I'm thinking of a retro exhaust setup. Currently have original manifolds for 5 bolt 289 being rebuilt (w/302 crank - keeping things low key) - hence the interest. Thanks for watching.
IronV8, I am not well versed in ALL of the LAT options and thier variations.
I do have a set of headers that came off my Tiger, A 1965 MK1a with a 1965 K-code 289, that was first put together back in the late 70's early 80's. The headers are not perfect but they are certainly usable as-is or great for refurbishment. I took them off to install a set of Jet-Hot coated headers when I purchased the car in 2002. Send me a messge, or give me contact info in this thread, and we can discuss the situation as I would be willing to sell them. I do not get to this site often so be patient with my reply. Thanks and have a great day.
I do have a set of headers that came off my Tiger, A 1965 MK1a with a 1965 K-code 289, that was first put together back in the late 70's early 80's. The headers are not perfect but they are certainly usable as-is or great for refurbishment. I took them off to install a set of Jet-Hot coated headers when I purchased the car in 2002. Send me a messge, or give me contact info in this thread, and we can discuss the situation as I would be willing to sell them. I do not get to this site often so be patient with my reply. Thanks and have a great day.
Whomever replied please private message me.
To those who tried to email me the messages will not load for some odd reason. I did respond to a couple emails from this forum, however, two about the headers will not work.
The headers I have are steel tube with almost straight down primary tubes (1-5/8" I think) that curve back and end in 2.5", three bolt collectors which end a bit before the exhaust hole in the X-brace. They look like regular headers with the exception of being built to run closer to the block than most others I have seen, but they are not "block huggers".
To those who tried to email me the messages will not load for some odd reason. I did respond to a couple emails from this forum, however, two about the headers will not work.
The headers I have are steel tube with almost straight down primary tubes (1-5/8" I think) that curve back and end in 2.5", three bolt collectors which end a bit before the exhaust hole in the X-brace. They look like regular headers with the exception of being built to run closer to the block than most others I have seen, but they are not "block huggers".