Tiger Fiberglass

Danno66

Danno66

Gold forum user
CAT Member
Messages
153
Hello friends, time for good news. I have been given a set of molds to make fender flares for our Tigers. Sets will be available when asked for. Also, I have been working on a fiberglass tonneau cover, for all the later cars with no soft top covers. The tonneau uses the factory hard-top front mounts and I think the rear roof mounting pins will work also. Details to follow.

tempImageHf2eRk.png


tempImage6sUCRE.png


tempImage3UlJCQ.png


tempImagey2PqmG.png
 
Here's a picture of a local car believed to be LAT flares . I believe these flares go over the existing wheel arches and no extra cutting required.
IMG_20170521_094008367.jpg
 
Sounds like some samples need to be brought to SUNI for display in the Parts Room!
 
65sunbeam said:
Sounds like some samples need to be brought to SUNI for display in the Parts Room!
Click to expand...
I'll let you have the first set, as seen in the photos. As my Tiger has already been modified in the wheel openings, the photos don't really show how they will fit a standard car. The fronts fit down to the front valance line. The rears cover the whole opening.

tempImagerPD9h5.png


tempImage2bfBAh.png
 
Really liking these options, how do we get more information please? Questions about pricing, shipping, fitment, etc.
I tried the PM route without a response at this point, looking forward to further discussions.
Thx,
Dave
 
I like the tonneau cover and great flares too…I built my flares in metal which was a lot of work!
 
Update time on the flares...now in production and ready for sale. Price is set at $250 and shipping is included at that price. I am also going to send a set with the club to SUNI, donation time.

Tonneau cover is also ready to go. They will be available in regular fiberglass and also carbon fiber. More details as requested by those interested. Costs are as follows..white gelcoat and regular fiberglass...$300, clear gelcoat and carbon fiber...$500...tinted clear gelcoat( to almost match your car ) is also available at $550. I can also add stiffness to allow for parade duty, no butt crack jokes here.
 
Danno66 said:
Hello friends, time for good news. I have been given a set of molds to make fender flares for our Tigers. Sets will be available when asked for. Also, I have been working on a fiberglass tonneau cover, for all the later cars with no soft top covers. The tonneau uses the factory hard-top front mounts and I think the rear roof mounting pins will work also. Details to follow.

View attachment 13885

View attachment 13886

View attachment 13887

View attachment 13888
Click to expand...
Looks good, please get a hold of me 🐯
 
At your service. How many would you like?
I have made several so far, but have not been happy with stiffness. The latest is good so far. I’ve run the car in traffic up to around 70 and no flutters. I’m in Riverside, and I buy my supplies in Ontario, near Vineyard and the 60. Let know if you wish to see the car, I’ll make a shopping run.
 
Danno66 said:
At your service. How many would you like?
I have made several so far, but have not been happy with stiffness. The latest is good so far. I’ve run the car in traffic up to around 70 and no flutters. I’m in Riverside, and I buy my supplies in Ontario, near Vineyard and the 60. Let know if you wish to see the car, I’ll make a shopping run.
Click to expand...
What do you know Dan, I live in Ontario, I probably shop where you shop; I have no appointments this week and I am retired. I would like to arrange a viewing of your cover. Get back to me on this 🐯
 
You must log in or register to reply here.
Back
Top