Wiper blades?
- Thread starter PITT40
- Start date
- Messages
- 4,330
Sunbeam specialties has them as do classic sunbeam.
Be careful to get ones with the correct springing points otherwise they don't sit on the screen correctly
Also check the width of the mounting tab on the arm there are 2 common sizes and your arms might have been changed.
Be careful to get ones with the correct springing points otherwise they don't sit on the screen correctly
Also check the width of the mounting tab on the arm there are 2 common sizes and your arms might have been changed.
- Messages
- 2,968
Number on Anco's Website is Correct
I checked the Anco website for what they said was their replacement blade for the Tiger. Please see this first attachment (Anco_Blades_Tiger.jpg) for the part numbers they listed. (Note: I have not checked these to see if they are close to looking like stock/original, if that is what you are looking for.)
View attachment 7257
The second attachment (Pep_Boys_Wipers_Tigers.jpg) is from a DIFFERENT store - Pep Boys. They have a listing for at least one of the blades Anco listed for the Tiger.
Are there any Pep Boys around where you live? Maybe one of the other car parts places might have them. Good luck!
I checked the Anco website for what they said was their replacement blade for the Tiger. Please see this first attachment (Anco_Blades_Tiger.jpg) for the part numbers they listed. (Note: I have not checked these to see if they are close to looking like stock/original, if that is what you are looking for.)
View attachment 7257
The second attachment (Pep_Boys_Wipers_Tigers.jpg) is from a DIFFERENT store - Pep Boys. They have a listing for at least one of the blades Anco listed for the Tiger.
Are there any Pep Boys around where you live? Maybe one of the other car parts places might have them. Good luck!
- Messages
- 1,942
blades
the primary reason for not showing a part number could be that the cars have been out of production for close to 50 years plus they were a low production car to start with. I sell a lot of blades to quick lubes, meineke, etc and we have nothing available in the size needed for these cars. why stock or manufacture something there is no market for. another problem you may find is the mounting. most blades sold today are universal fit. the blades I have bought from SS are 10 inch. I have also bought some TEX 11 inch and they work. try SS or even VB.
the primary reason for not showing a part number could be that the cars have been out of production for close to 50 years plus they were a low production car to start with. I sell a lot of blades to quick lubes, meineke, etc and we have nothing available in the size needed for these cars. why stock or manufacture something there is no market for. another problem you may find is the mounting. most blades sold today are universal fit. the blades I have bought from SS are 10 inch. I have also bought some TEX 11 inch and they work. try SS or even VB.