- Messages
- 51
I recently installed a new Everflex convertible top, (hood) on my 1966 Mark 1a. The spot welds broke free and the left Cantrail arm needs to be tack welded. I drilled and tapped 2 holes in the hinge plate to hold the arm in place while being welded but everyone the looks at it would rather have the arm removed to put in new tacks and plug weld the holes I have tapped into the arm. Convertible top part D236, hinge pin --cantrail to hood frame needs to come out. It is a small diameter tapered pin that needs to be removed from the bottom of the hinge. See attached sketch for D236. Any suggestions on how to press the pin out of the frame, in the car?
Thanks
1949fl
Jim McLaughlin
Thanks
1949fl
Jim McLaughlin