Thanks Jon and Tom!
Jon, I said oil cooler but I meant oil filter. I made my own remote oil filter setup with a canton racing oil filter adapter block and fancy AN hoses. Those will certainly need some tweaking, but I will worry about it when the crossmember is in for good. The brackets I was referring to are the one you captured in the picture - the ones where the brake hoses mount to the unions. I may be wrong but it looks like the crossmember on Dale’s website has those mounting brackets in a different orientation, 90º from where the current model is. But I may be off on that. Which dual master did you go with? I have a courier unit bolted into the project as a mock up and it looks like it will work. Dale suggested a 7/8” or 13/16” MC and a 1:6 Tom Hall modified pedal. I may give the courier MC a whirl and change out if need be.
Tom, no rush but pictures would a great! Thanks!
Management has just presented me with a home improvement project so car progress will likely halt for a few weeks.
But thanks for the info. Perhaps the next guy installing one of these might find this info helpful!
Cheers, -Kevin