Wanted Brake Master Cylinder

[kenmat]

Wanted: Brake Master Cylinder that is cosmetically nice..Not a lot of corrosion on the casting..
Suitable for rebuilding..
Contact Ken @ (214) 856-5124

 

[Bryan]

I have a lot of used ones even cast iron ones- don't know the bores- outsides are good-Bryan

 

[kenmat]

I have a lot of used ones even cast iron ones- don't know the bores- outsides are good-Bryan

Need a 5/8" bore with aluminum cast housing. Do you have one with a good plastic bowl and lid?
Regards,
Ken

 

[Bryan]

yes i do -I'll have to pull the center and check the bore=

 

[kenmat]

yes i do -I'll have to pull the center and check the bore=

Bryon,
My intention was to have it sleeved if the bore had a scratch or something..If not I will rekit it..Let me know what you want for it.
Thanks,
Ken

 

[spmdr]

5/8" Bore?? Stock Tiger Brake master is 7/8" bore. BTW, there are at least 2 different length aluminum housings.

As far as I know, Tigers use the longer housing.

DW

 

[kenmat]

5/8" Bore?? Stock Tiger Brake master is 7/8" bore. BTW, there are at least 2 different length aluminum housings.

As far as I know, Tigers use the longer housing.

DW

Thanks Dan..7/8" it is..Bryon probably knows that as well and just ignores my geriatric brain fade moments..

 

[kenmat]

yes i do -I'll have to pull the center and check the bore=

Bryon DW correctly points out that the bore is 7/8" not 5/8".. You probably knew that...