TigerBob86
Silver forum user
- Messages
- 60
I'm looking for a limited slip for my stock Dana 44. I think Auburn made/makes one.
Thanks,
Bob
bobdixon at frii dot com
Thanks,
Bob
bobdixon at frii dot com
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Wanted Limited slip
- Thread starter TigerBob86
- Start date
I'm looking for a limited slip for my stock Dana 44. I think Auburn made/makes one.
Thanks,
Bob
bobdixon at frii dot com
I just bought an Auburn and on sale now at Summit for 400 shipped
It will most likely have 3/8 carrier bolts to accept the ring gear and stock ring gear is 7/16. The fix is Jag conversion shouldered bolts made for just this purpose, or sleeves.
Easy enough
If you are buying a US ring gear then it will most likely be 3/8 and no problem......However the spline count will be wrong.
See my post regarding ring bolt sizes and the fix for the splines using a Dana Spicer "companion flange" and yoke
TigerBob86
Silver forum user
- Messages
- 60
Looks like I'm all set. Thanks everyone.