Rear Hubs

[67MKII]

I am in need of a pair of rear hubs. I don't need the axels - just the hubs.
If you have a pair and are interested in selling, please contact me with the Private Message option.

Thanks in advance.

John Stithem

 

[Forrest39]

If you can't find any stock ones, call Doug Jennings and his machinist can make you some. I got a pair drill for 5-lug hubs last year. High quality replacements. Let me know if you wold like his number.
Cheers, -Kevin

 

[Warren]

To be moved

Pending moving to parts wanted section. Dale lops off the axle ends of his modified cars as I understand.

 

[Bryan]

there's one on e-pay- oh its warren forget it

 

[67MKII]

Hi Kevin,
I have Doug's hubs on and I am trying to fit them with the Wilwood big brake set-up (Dale's).

But the emergency brake set up is not allowing the hubs to seat on the axel. I think Doug's hubs are bigger in diameter than the stock hubs (see pictures). I have used the hubs for many years and they are drilled for 1/2" studs but it looks like they may not work for this application. I could have the hubs turned down a bit at the machine shop but I'm afraid they won't want to take them down enough (approx. 1/8") for safety reasons. I was thinking I might need to put on the original hubs.
Has anyone drilled out the original hubs for 1/2" studs? Is there still plenty of room between the stud and the end of the hub?

Any ideas?
I will try to call Dale again.

John