LAT 58 tail stripe instructions & guidelnes

T

turtle

Bronze forum user
Messages
18
Would appreciate knowing how/where I can obtain detailed instructions for applying LAT 58 tail atripes on my Tiger. Photos would be wonderful along with step-by-step being led by the hand.
 
Page 90 B-O-Norman

Pg. 90 = LAT - 58 "Tiger Tail" Instructions" "For Perfect "Tiger Tail" results follow these three easy steps: What follows then are 7 tiny illustrated panels of stripes being applied to an Alpine. Apparently what was provided back in the day when they sold you this stripe kit for $3.50

This is not complete, nor does it look real easy. A shop experianced in striping might get it right if you showed them these little pictures.
 
This is all the factory gave you:

49_1.JPG
 
Thank you. Can you direct me to a source where I could read the text? The info that you sent has illgible (too small) text. Appreciate your help -- Turtle Jim
 
Jim,

I might have a copy of it larger at home.. but will have to hunt for it.. see if you can save that pic and zoon in...
 
Could someone advise me please on the width of the LAT 58 stripes. I have seen some photos though cannot discern if they are 2" or 3". On the car photos I have seen with them on, they do not appear to larger than 3" though hard to tell.
 
The original strip is 2 1/4 inches, Turtle if you do a search on this site this is discussed and shows a larger picture of the instructions just type in tiger tail
 
kbecker said:
The original strip is 2 1/4 inches, Turtle if you do a search on this site this is discussed and shows a larger picture of the instructions just type in tiger tail
Click to expand...
Thanks for the sizing information. Also searched tiger tail though it appears that is for CAT members only
 
You must log in or register to reply here.
Back
Top